MPN:24C02
The 24C02 (AT24C02) is a 2-Kbit I²C-compatible serial EEPROM from ATMEL, designed for reliable non-volatile data storage. It supports byte and page write operations and operates with a low power supply voltage, making it ideal for embedded systems and microcontroller-based applications.

This EEPROM features a two-wire I²C interface, allowing easy integration with microcontrollers while minimizing pin count. With high data reliability, long endurance, and extended data retention, the 24C02 is widely used in configuration storage, calibration data, and parameter memory applications.

MPN:MC34063AL

The UTC MC34063AL is a versatile DC-to-DC switching regulator controller designed for step-down (buck), step-up (boost), and inverting converter applications. It integrates all the essential building blocks required to design a switching power supply, including an oscillator, comparator, reference voltage, driver, and current-limiting circuitry.

With a wide operating input voltage range and low external component requirement, the MC34063AL is ideal for battery-powered devices, embedded systems, industrial electronics, and general-purpose power regulation circuits. Its reliable performance and flexible configuration make it a popular choice in cost-sensitive designs.

MPN:P55NF06
ThinkiSemi50N06 is three-terminal silicon device with current conduction capability of about 50A, fast switching speed. Low on-state resistance, breakdown voltage rating of 60V, and max threshold voltages of 4 volt. It is mainly suitable electronic ballast, and low power switching mode power appliances.

MPN:74HC125N
The 74HC125N is a quad non-inverting bus buffer / line driver from Philips Semiconductors, part of the 74HC (High-Speed CMOS) logic family. It features four independent buffers with active-low 3-state outputs, allowing multiple devices to share a common data bus. With low power consumption, high noise immunity, and fast switching speed, this IC is widely used in bus buffering, signal isolation, data line driving, and microprocessor interfacing. The N suffix indicates a DIP through-hole package.

MPN:74HC573N
The 74HC573N is an 8-bit transparent latch IC from Philips Semiconductors, part of the 74HC (High-Speed CMOS) logic family. It features 3-state (tri-state) outputs, allowing multiple devices to share a common data bus. The IC operates over a wide voltage range with low power consumption and high noise immunity, making it ideal for bus latching, data buffering, microprocessor interfacing, and memory address storage. The N suffix indicates a DIP through-hole package, suitable for prototyping and industrial applications.

MPN:74HCT573N
The 74HCT573N is an 8-bit transparent latch IC from NXP Semiconductors, belonging to the 74HCT (High-Speed CMOS, TTL-compatible) logic family. It features 3-state (tri-state) outputs, allowing direct connection to shared data buses. Designed for 5V operation with TTL input compatibility, this IC is widely used in bus latching, data buffering, microprocessor and memory interfacing. The N suffix denotes a DIP through-hole package, ideal for prototyping and industrial designs.